BassDogs.com Forum Index BassDogs.com
Bass Guitar Forum
 

 FAQFAQ SearchSearch Free GamesMake a Donation  UsergroupsUsergroups Free GamesForum Rules ProfileContact RegisterRegister 
ProfileWebsite News Log inSubmit Articles  ProfileProfile Log in to check your private messagesLog in to check your private messages Log inLog in 

Hartke Stack Question



 
Post new topic   Reply to topic    BassDogs.com Forum Index -> Hartke Bass Amps
Author Message
punkindrublic
Newbie Alert



Joined: 10 Dec 2005
Posts: 2
PostPosted: Sat Dec 10, 2005 8:55 am    Post subject: Hartke Stack Question Reply with quote
Shocked

Hey, I just Purchased a hartke stack... A hartke 3500a bass head, an XL15, and a 4x10 XL... I just want to make sure im connecting everything correctly... It works fine, but im just making sure... There are two outputs labeled 8 ohms on the back of the head.. Do i run a chord from each of those to each cabinet? One of them to the 15 and one of them to the 4x10? or do i just connect one of them and then run the other cab off of the extension output on the cab thats connected... Wow, thats kinda confusing....
Back to top
View user's profile Send private message AIM Address
MVE
Hamster



Joined: 18 Mar 2004
Posts: 85

Location: Chicago- NorthSide
PostPosted: Fri Apr 14, 2006 2:57 pm    Post subject: Reply with quote
If the 3500's outputs are labled "parrallel" then it won't matter. But, if there are two separate one that have a selective crossover, then you should connect them individually so that you can control the eq of each cab.
_________________
Matthew VanEtten
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    BassDogs.com Forum Index -> Hartke Bass Amps All times are GMT - 8 Hours
Page 1 of 1

 

© 2001-2007