BassDogs.com Forum Index BassDogs.com
Bass Guitar Forum
 

 FAQFAQ SearchSearch Free GamesMake a Donation  UsergroupsUsergroups Free GamesForum Rules ProfileContact RegisterRegister 
ProfileWebsite News Log inSubmit Articles  ProfileProfile Log in to check your private messagesLog in to check your private messages Log inLog in 

Urgent need help!!!!!!!!



 
Post new topic   Reply to topic    BassDogs.com Forum Index -> Jaco's Cafe
Author Message
globalmaa
Ferret



Joined: 29 Apr 2003
Posts: 111
PostPosted: Sun Dec 10, 2006 6:34 pm    Post subject: Urgent need help!!!!!!!! Reply with quote
I have a Behringer BX3000T 300 watt 8ohm max. 4 ohm min. bass head. i'm using a Yorkville 115B 15" 8 ohm 300 watt cab, problem i just got a Peavey 210TX 300 watt cab but it is 4 ohms. Now would you rewire the 210 to 16 ohms and run the cabs together into the BX3000T for a total of 5.67 ohms or option #2
I have a peavey Deltafex stereo digital effects processor ( will change to a bass preamp )and a Nady Xa1100 power amp. the power amp is rated as follows
2 ohms 730watts x2
4 ohms 450 watts x2
8 ohms 300 watts x2

the Xa1100 is a 2 channel Stereo power amp. could i run the bass into the deltafex and then into channel B of the power amp and using the B channel speaker output to the 115B and then connect the 210TX to the 115B. would this give me a 2.67ohm? my amp will take a 2 ohm at 730 watts.

the other side of the amp is for my PA . Could i connect my Behringer RX1202FX to channel A and then daisy chain my Traynor YSC 10's rated at 8 ohms each and also a Community MPV 28 rated at 8 ohms would this balance out both channels at 2.67 ohms. or should i just rewire the 210TX to 16 ohms and use my Behringer BX3000T bass head. let me know thanks
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    BassDogs.com Forum Index -> Jaco's Cafe All times are GMT - 8 Hours
Page 1 of 1

 

© 2001-2007